Carefully remove the ozone plate
from the card cage by grasping the middle of the edge nearest to you
and slowly pull it straight out.
Clean the plate with hot water and
ammonia in a 50/50 solution. You may use a toothbrush if needed,
scrubbing gently to avoid fractures. Rinse with hot water and allow to
dry completely. A hair dryer may be used if needed.
MAKE SURE PLATES ARE DRY BEFORE
REINSTALLING INTO UNIT.
Reinstall plate gently, making sure that
the electrical tabs are in contact with the plate. Turn on unit to
ensure proper placement. If the unit begins to produce ozone,
you have cleaned and installed the plates properly.